Combustion, Furnaces & Boilers
Recovery Boiler
See the smelt bed and boiler tubes, light and prove the start-up burners, and control combustion air and flue gas in the black liquor recovery boiler.
Measures: Smelt bed imaging · Burner ignition & flame monitoring · Start-up fuel oil flow · Combustion air flow · Flue gas O2 / CO · Soap skimming
Smelt Bed & Furnace Imaging
A mid-wave thermal imaging borescope sees through the dust and smoke in the furnace to show the smelt bed, the burning liquor and the boiler tubes, with accurate temperatures across the whole image. A furnace camera gives operators a clear live view.
MWIR-B-640 Thermal Imaging SolutionCombustion atmospheres using dirty fuels require a thermal imaging solution with advanced spectral filtering and high resolution to deliver clear live images from within a furnace, boiler or incinerator.
Ultratemp High Temperature CameraCanty ULTRATEMP™ Cameras are ideal for demanding applications involving visual inspection or verification in extreme temperature environments.
Start-Up & Load Burners
High energy igniters light the oil and gas burners used for start-up and load support, and flame controllers prove each flame to the burner management system.
XEC 18-H Standard High Energy Power Unit18 J high energy ignition power unit for gas and light oil burners in boilers, furnaces and gas turbines, in safe-area or ATEX enclosures.
XEC-10 / XEC-15 / XEC-24 Heavy Duty High Energy Power UnitsHeavy duty power units from 10 to 24.5 J and up to 24 sparks per second for direct ignition of diesel and heavy fuel oil.
High Energy Ignition Spark Rods & Replaceable TipsIgnition rods in 12, 14 and 17 mm diameters with screw-on, self-cleaning spark tips (HERC17, HEM17, HEM14) rated to 760–1000 °C; safe-area or Ex d.
TP Series Gas Pilot Torches (TP15 – TP76)Gas pilot burners from 2 kW to 600 kW with high voltage or high energy ignition and optional ionisation flame detection; lengths made to order.
Compact Flame ControllersFor the flame radiation analysis, a well approved integral procedure in the respective spectrum is carried out with the compact flame controller. After a pre-amplification, the unwanted continuous wave light component is withdrawn from…
Flame Monitoring Fibre Optic CablesFor loss-free transmission of flame radiation to the flame scanner or compact flame controller. Particularly suitable for high operating temperatures (up to 600°C) and/or strong vibrations. The optical fibre consists of a glass fibre…
Start-Up Fuel Oil Flow
Thermal dispersion flow switches confirm the fuel oil and atomising flows to the start-up burners, with very low flow sensitivity and no moving parts.
Combustion Air Flow
Multipoint thermal mass flow meters measure primary, secondary and tertiary air in large ducts, so the air split can be controlled for stable burning and low emissions.
Flue Gas Analysis
In-situ TDLAS analysers measure O2 and CO in the flue gas for combustion control, and can also monitor H2S emissions.
Black Liquor Soap Skimming
Thermal dispersion switches tell black liquor from soap at the high and low points of the skim tank, where float switches and DP level tend to fail.